Vagrant up error while executing `VBoxManage`

-
This day, I running vagrant up in my laptop then isuse. I can not start VM in vagrant. My laptop use windows 10. Error code as below:

$ vagrant.exe up
There was an error while executing `VBoxManage`, a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.

Command: ["showvminfo", "600a47e1-9637-4054-89c2-df3e5bf8f691"]

Stderr: VBoxManage.exe: error: Code ERROR_MOD_NOT_FOUND 0x8007007E (0x8007007E) - ERROR_MOD_NOT_FOUND 0x8007007E (extended info not available)
VBoxManage.exe: error: Context: "GetGuestOSType(osTypeId.raw(), osType.asOutParam())" at line 575 of file VBoxManageInfo.cpp

Solve problem There was an error while executing `VBoxManage`, a CLI used by Vagrant for controlling VirtualBox.


Step 1: Right click on VirtualBox.exe and select Properties.

Step 2: Click the Compatability tab. Click the button that says 'Change settings for all users'.
Vagrant up error while executing `VBoxManage`

Step 3: In the new window that pops up check 'Run this program as administrator'. --> Click the Ok button.
Vagrant up error while executing `VBoxManage`

Step 4: Click Apply
Now, You can running vagrant up in windows 10.
Vagrant up error while executing `VBoxManage`

Comments

  1. MayankFebruary 15, 2020 at 6:49 PM

    I am still getting same error

    $ vagrant.exe up
    Bringing machine 'default' up with 'virtualbox' provider...
    ==> default: Clearing any previously set forwarded ports...
    ==> default: Clearing any previously set network interfaces...
    ==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
    default: Adapter 2: bridged
    ==> default: You are trying to forward to privileged ports (ports <= 1024). Most
    ==> default: operating systems restrict this to only privileged process (typically
    ==> default: processes running as an administrative user). This is a warning in case
    ==> default: the port forwarding doesn't work. If any problems occur, please try a
    ==> default: port higher than 1024.
    ==> default: Forwarding ports...
    default: 80 (guest) => 80 (host) (adapter 1)
    default: 8080 (guest) => 8080 (host) (adapter 1)
    default: 9090 (guest) => 9090 (host) (adapter 1)
    default: 5000 (guest) => 5000 (host) (adapter 1)
    default: 3000 (guest) => 3000 (host) (adapter 1)
    default: 22 (guest) => 2222 (host) (adapter 1)
    ==> default: Running 'pre-boot' VM customizations...
    ==> default: Booting VM...
    There was an error while executing `VBoxManage`, a CLI used by Vagrant
    for controlling VirtualBox. The command and stderr is shown below.

    Command: ["startvm", "04050abe-70e9-4a49-aec6-1d7581d7f16e", "--type", "headless"]

    Stderr: VBoxManage.exe: error: The virtual machine 'vagrant_default_1571689157293_26137' has terminated unexpectedly during startup with exit code 1 (0x1). More details may be available in 'C:\Users\Administrator\VirtualBox VMs\vagrant_default_1571689157293_26137\Logs\VBoxHardening.log'
    VBoxManage.exe: error: Details: code E_FAIL (0x80004005), component MachineWrap, interface IMachine

    ReplyDelete

Post a Comment

Popular posts from this blog

zimbra some services are not running [Solve problem]

-
How to solved zimbra some services are not running. That after, to installed zimbra mail server. The display a some admin console status red in environment multiple server ( zimbra ldap, zimbra mailbox, zimbra mta etc.). Link to below you maybe likes: How to install and configure zimbra multi server.   How to restrict to user sending mail on zimbra 8.6. How to Restrict Sending to Distribution list in zimbra mail. How to change last login time for all accounts in zimbra ldap. How to zimbra reject authenticated sender login mismatch. Error zimbra some services are not running as bellow Step by step guide the solve problem zimbra some services are not running the following: To restart and enable cron service the permanently. service crond restart chkconfig crond on Opening rsyslog.conf file and uncomment the following. vim /etc/rsyslog.conf Uncomment these two lines $modload imupd $UDPServerRun514   To restart and enable rsyslog service the permanently. servic
Read more

Bash script list all IP addresses connected to Server

-
Running to bash script list all IP addresses connected to Server ./studyscript.sh  >/dev/null 2>&1 The bash script list all IP addresses connected to Server #!/bin/bash rm -f /tmp/list_IP rm -f /tmp/list_IPP rm -f /tmp/list_IPdone netstat -ntu | grep ESTA | awk -F: '{ print $2 }' | sed -r 's/^.{12}//' |sed 's/:/\n/g' | sed '/^\s*$/d'| sort > /tmp/list_IP #sleep 10 while read -r p do  curl ipinfo.io/$p done < /tmp/list_IP >/tmp/list_IPP cat /tmp/list_IPP | egrep "ip|country" |sed '$!N;s/\n/ /' |sed -r 's/^.{9}//' |sed 's/"country": "//' |sed 's/",//g' >> /tmp/list_IPdone echo "-----IP------  --country--" >> /tmp/list_IPdone Note the bash script list all IP addresses connected to Server sed 's/:/\n/g' Delete duplicate lines sed '/^\s*$/d' Delete empty lines sed '$!N;s/\n/ /' How to merge every two lines in
Read more

How to install php7 on centos 6

-
How to install php7 on centos 6, I'm use remi repo to install remi-php70. I'm running commands as root account. To install php7  yum install wget yum-utils wget http://rpms.famillecollet.com/enterprise/remi-release-6.rpm rpm -Uvh remi-release-6.rpm yum-config-manager --enable remi-php70 yum install php --enablerepo=remi-php70 To check for available repositories yum repolist For example: To install php7 for nginx ( Due to, nginx use php-fpm and php-mysql) yum install php-fpm php-mysql --enablerepo=remi-php70 Thanks for reading! How to install php7 on centos 6
Read more